Posted inArduino C/C++ ESP8266 Thai

[TH] Arduino: ควบคุมการเคลื่อนที่หุ่นยนต์รถผ่านบราวเซอร์ด้วย esp8266

จากบทความการควบคุมหุ่นยนต์รถ 2 ล้อแบบ Servo ใน ESP8266+RoboServo และมอเตอร์ไฟฟ้ากระแสตรงใน VisionRobo Car: Drive Motor ทางเราได้นำหุ่นยนต์รถในตัวที่ 2 เปลี่ยนจาก Raspberry Pi เป็น ESP8266 เพื่อสั่งงานผ่าน WiFi โดยใช้แนวทางจาก บทความ ESP-01s+Relay มาเขียนใหม่ด้วยภาษา C/C++ ของ Arduino ด้วยคลาส WebServer จากที่ในบทความของ ESP8266 เป็น MicroPython ดังนั้น เมื่อทำตามบทความนี้จนเสร็จจะสามารถสั่งงานหุ่นบนต์ในภาพตัวอย่างที่ 1 ได้ด้วยการเชื่อมต่อโทรศัพท์หรืออุปกรณ์สื่อสารไปที่ 192.168.4.1 และสั่งให้เดินหน้า ถอยหลัง เลี้ยวซ้าย เลี้ยวขวา หรือหยุดได้

ภาพที่ 1 ตัวอย่างหุ่นยนต์รถสำหรับการทดลองในบทความนี้
Posted inArduino Arduino C/C++ Cortex-M3 English ESP32 ESP8266 STM32

[EN] ST7735s

This article describes setting up the Arduino’s TFT_eSPI library to use the ST7735s-controlled TFT LCD that was written as an example in a previous article in Python. We found that there are 2 0.96″ LCD IPS ST7735s models, which are GREENTAB160x80 and REDTAB160x80. Both modules differ in the spacing between them, as shown in Figure 1. This article uses the ESP8266, ESP32 DO-IT DevKit version with ESP32CAM and STM32F103C8T6. It is a board to test the functionality of the program.

(Figure. 1 0.96” IPS TFT module)
Posted indisplay English ESP32 ESP8266 MicroPython Python

[EN] Improve st7735 blue-tab/red-tab 0.96 ” library

This article is an update of the st7735 library file for Micropython by Billy Cheung (accessed 2021-09-07) published on github. It is a library that has been updated by Guy Caver to support ST7735s. The required libraries include st7735.py and sysfont.py Guy Carver implements esp8266 and esp32 to provide better display speed through the principle of display buffering for pixel storage and additional instructions for sending data from buffer to TFT module via SPI bus.

(Figure. 1 dCore-miniML board with ST7735 0.96″ display module installed)
Posted indisplay English ESP32 ESP8266 MicroPython Python Sensor

[EN] The dCore-espWST

This article recommends using the esp8266 to read temperature and humidity from the DHT11 sensor, the voltage from the LDR sensor, received from the switch, and display via OLED with MicroPython’s Python language, this feature is the dCore-espWST board we are using (Which in the previous article we used the dCore-esp32WST with the same design, but using esp32, but the program code can still be used with the model board) and is a board for use in teaching IoT subjects. The prototype structure of the board is as shown in Figure 1, which is normally used with a battery power supply unit with a solar panel charging circuit.

(Figure. 1 dCore-espWSTprototype)
Posted inEnglish ESP32 ESP8266 MicroPython

[EN] The MicroPython Internal File System.

This article is an implementation of the MicroPython file system using the esp8266 and esp32 microcontroller boards as an experimental board. The file system usage involves directories and files including connecting the device to be seen as a MicroPython file system, for example, connecting to an SD-Card to see it as a system directory, etc. It uses the os class to create, open, access, write data and disable files which will be part of MicroPython’s file class.

Posted inArduino English ESP32 ESP8266 MicroPython

[EN] ESP8266/ESP32 WiFi

The ESP8266 and ESP32 boards are equipped with built-in WiFi connectivity. They can work in both self-application mode (Access Point) and client mode connected to an existing WiFi network or STA. Developers can set the device name (ESSID) or use the default name from the system as MicroPython-xxxx, where x represents the MAC Address of the device, the password is micropythoN (developers can assign new) and the IP Address (IP Address) is 192.168.4.1.

(Figure. Our ESP8266+Uno)
Posted inArduino Arduino C/C++ English ESP8266

[EN] Display time from NTP and TimeLib with esp8266

This article is an example of using the Arduino framework’s NTP and TimeLib libraries with either the ESP-01s (Figure 1) or esp8266 to report the current time via the web served by the esp8266, which in this example is called NTPClient and TimeLib libraries. An Internet connection is required to read the date and time from an NTP provider such as time.nist.gov.

(Figure. 1 ESP-01s on dCore-0 v.0.7)